An Introduction to Rigging, pt. 6: The tools

Previously: Intro to rigging, spread, and span || Oar length, inboard, and blade profile || Pitch || Rigger height and work through || Rigging and de-rigging a boat

The final post in this rigging series is going to go over a few of the tools you need to rig your boat. There aren’t many and in all likelihood, you’ve already got most or all of these hanging around your boathouse somewhere.

Pitch meter

Used to measure pitch, hence the name. The one I have posted here a manual one from Empacher (Vespoli also sells them) but there are also digital ones available.

Tape measure

Used for measuring everything else; spread, span, height, etc. Easily found at Lowe’s, Home Depot, or the junk drawer in your kitchen.

7/16″ or 10mm wrench

Every coxswain should have one or more 7/16 or 10mm wrenches, depending on what brand of boat you have. You can also get a coxswain multi-tool which has a few different wrenches built into one. The one above is from JL but Vespoli also sells them. I have two of the Vespoli tools and like them but if given the option I’ll always go with the normal wrenches just because I find them easier to use, particularly when trying to loosen bolts that have been tightened too much. The smaller Vespoli wrenches don’t provide as much leverage so in those cases they can be a little difficult to handle.

The only one of these that you definitely need to own is a wrench – your coach will already have the pitch meter and tape measure in their toolboxes.

Advertisements

2 thoughts on “An Introduction to Rigging, pt. 6: The tools

Thoughts?

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s